- Product description
The freely configurableAEB MP32Setis the most compact control unit from AEB and is perfect for installation in difficult spaces.
It is suitable for all3-4 cylinder engines with sequential injection. During operation, the control unit measures the injection times and the gas pressure and calculates the optimum metering time and quantity.
The MP32 is equipped with a diagnostic system for each gas component, the status of which can be monitored by the calibration software during the installation of the system and at any point in the engine's life. This feature can prevent malfunctions and facilitates troubleshooting.
In addition, the calibration tool provides instructions to simplify system installation and adjustment.
Scope of delivery:
- AEB MP32 control unit 3-4 cylinders
- AEB MP32 wiring harness 3-4 cylinders
- AEB MAP sensor
- AEB changeover switch
- Small parts bag
Technical details:
Software and installation instructions can be downloaded for freeclick here!
Plug connection: IP (6K9K) incl. water protection and lever system
Supply voltage: Vbatt=10÷16V.
Operating temperature: -40÷110°C.
Current consumption with actuators locked: Imax =0.5A
Current consumption in standby mode: Istandby =10mA.
Up to 4 gas injectors with the following characteristics Imax=6, Vbatt,max=16V
2 power outputs for gas solenoid valves
Pmax=25W, Imax=2A (power and maximum current for each output with two outputs activated)
Pmax=50W, Imax=4A (power and maximum current for only one output).
Sensor:
PT MAP sensor: 463059000 (Ø10), 463500000 (Ø12), 463505000 (Ø14)
MAP sensor: AEB025, original sensor of the vehicle
Gas temperature sensor: AEB sensor (4.7kOhm - included in PT MAP sensor), sensor (2.2kOhm)
Water temperature sensor: 4K7, original
Level sensor: AEB level sensor, AEB Linear (Cartesio), 0-90Ohm standard sensor, not standard inverted
Lambda sensor: 0-1V, 0-5V, 5-0V, 0.8-1.6V, UEGO (linear sensor in current)
Changeover switch: AEB119B.
Homologations:
10R-03
67R-01
110R-00
Optional scope of delivery:
- CPR reducer (6mm up to 110KW)
- Valtek T32 injection rail 3-4 cylinders
- Filter gas phase
- Exhaust gas certificate/ R115
- Piping (copper, aluminium, flex)
- Mounting kit (for detailed list please click here)
- Valve Saver Kit