Cavagna regulator system 30 mbar 1.5kg/h incl. crash sensor (gas use while driving)
Cavagna regulator system 30 mbar 1.5kg/h incl. crash sensor (gas use while driving)

Cavagna regulator system 30 mbar 1.5kg/h incl. crash sensor (gas use while driving)

Article no.: 107923
Manufacturer: CAVAGNA

Offer is exclusively for commercial customers. Prices are only visible after login.

  • Product description

Gas control unit for direct mounting on the rv propane tank "Gas use while driving".

The set consists of a gas regulator system30mbar 1.5kg/h, control and switch paneland the crashprotection unit (CPU).

The regulator system can beinstalled on both 30° and 105° fuel gas tanks. The crash sensor is installed separately inside the vehicle.

The patented Crash Protection Unit (CPU) makes it possible to use consumer devices such as heaters, refrigerators, etc. while the vehicle is stationary or inmotion. The CPU is firmly connected to the chassis at any point inside the vehicle by means of 4 screws.
In the event of an accident,emergency braking or inclinations of57° or more, the gas supply isinterrupted immediately. In addition, almost all common gas warning devices can be connected directly to the CPU. In the event of a "gas alarm", the gas supply is then also interrupted immediately for your greatest possible safety.
The Crah sensor integrated in the CPU can be reset via the switch in the vehicle cockpit.

The EU heater directives according to 2001/56/EC, including the special regulations for France, are fully complied with. Provided that two high-pressure hoses with hose rupture safety devices (SBS) are connected.

Technical data:

Outlet pressure: 30 mbar
Flow rate: 1.5 kg/h
Combination connection LPG tank/gas cylinder:

- 21.8 union nut left-hand thread
- G. 5 Large cylinder connection (5, 11 kg gas cylinders)
- G. 12 Small cylinder connection (33 kg gas cylinders)
- direct connection to rv propane tank (21.8 mm)

Regulator outlet: 10 mm pipe with adapter piece to 8 mm pipe

Scope of delivery:

- Regulator system 30 mbar / 1.5 kg/h with test valve
- Connection for 8 mm and 10 mm gas pipe
- Control unit with crash sensor
- Display and operating element (on/off switch)
- 3 m connecting cable solenoid valve to control unit
- 8 m control cable (control unit to operating unit)
- Installation and operating instructions